| Printing Equipment |
Almost any Inkjet Printer using Sublimation Ink |
|---|---|
| Printing: | Print Normally on a Inkjet Printer Using Inkjet Release Paper. |
| Heat Press Settings: | 1. Do NOT pre-heat garment - save time! 2. Position blank, unprinted DuraCotton SUB on garment, shinny side down 4. Heat Press 400 F / 205 C degrees, 6 - 10 seconds, 3/4 pressure or more 5. Delay peel 1.5 seconds - peel should be easy without resistance or pulling 6. Print image on virtually 100% inkjet sublimation Release Paper. Print 'read-wrong' or 'horizontal flipped' 7. Heat Press 400 F / 205 C degrees, 45 seconds, 3/4+ pressure or more 8. HOT PEEL! Resulting image will have ZERO Hand, INVISIBLE Polymer (ZERO Cutting required). |
| Washing Instructions: | Turn Garment inside out for washing Wash in COLD Water (maximum 40 C degrees) Use MILD detergent - NO BLEACH Hang Dry or Tumble Dry with cool or warm air setting Do NOT use fabric softeners Do NOT dry clean |
| Notes: | 1. experiment with heat press settings to achieve invisible polymer - ZERO Cutting, ZERO Hand 2. when pressed correctly, no toner will transfer to the Teflon; re-use Teflon repeatedly 3. should peel virtually 100% clean - leaving a light ghost of the image on the carrier paper |