| Printing Equipment |
High Definition NON-OIL Laser Printers and Copiers: USING REGULAR OEM TONER OKI C3300, C3400, C5500, C5600, C5800, C6000, C 6100, C8800 HP 26xx, 45xx Canon Image press C1 & c7000 Xerox 240, 250 & 7300 |
|---|---|
| Printing: | Fan paper to separate sheets Feed paper from manual tray (MPT) - single or multi sheets Print / Copy onto the coated side (shinny) of the transfer paper Print / Copy FLIP HORIZONTAL Print / Copy using HEAVY STOCK / GLOSSY / Transparency / Medium (varies with printer) |
| Heat Press Settings: | Position target substrate (eg t-shirt) Position DuraCotton HT transfer with printed (shinny) side down on shirt Do NOT pre-heat shirt to remove moisture Press 405 F / 205 C degrees using 3/4 pressure (varies with press, operator - adjust for ZERO Hand) for 12 - 16 seconds. HOT PEEL carrier paper, with a steady pull THEN: Overlay with Teflon Sheet, press for 4 - 6 seconds,(same settings) HOT PEEL QUICKLY |
| Washing Instructions: | Turn Garment inside out for washing Wash in COLD Water (maximum 40 C degrees) Use MILD detergent - NO BLEACH, no bleach alternatives Hang Dry or Tumble Dry with cool / warm air setting Do NOT use fabric softeners Do NOT dry clean. |
| Notes: | 1. experiment with heat press settings (time, pressure) to achieve invisible polymer ZERO Cutting, ZERO Hand after one wash 2. when pressed correctly, only a small amount of toner will be left on carrier paper. 3. should peel virtually 100% clean - leaving all color on shirt - virtually every time) |